каркасные дома

Materials and certificates            About us          Contacts

 
каркасные дома цена

ROOF TRUSSES MiTek

The manufacturing company LIAHOVICHIDREV EXPORT LLC provides services for the design and manufacture of trusses and rafter structures using the MiTek metal-tooth plates technology.

 

Thanks to MiTek licensed software, the roof of a building of any complexity is calculated. The designed structure is guaranteed to provide the specified load-bearing capacity in accordance with the requirements of building codes for snow, wind and operational load.

 

MiTek technology is the design and factory production of wooden rafter truss structures connected at the nodes by metal plates with stamped teeth. The production of such structures originated in North America in the middle of the last century, during the last forty years this idea has been further developed in European countries (Switzerland, Belgium, Germany). Such structures are used in buildings of various purposes (residential buildings and attic floors, industrial premises, cultural and household facilities, sports facilities). The wide scope of application is due to the ability to overlap spans up to 30m without internal supports.

The basis of the system are trusses connected at the nodes by steel fasteners with stamped teeth, which are called connecting plates.

 
 
производство ферм mitek
Произфодство ферм MiTek на металлозубчатых пластинах

Certificates:

Деревянные фермы. Производтсво
Roof trusses MiTek
Сертификат MiTek
Производство деревянных ферм MiTek
Произвдство деревянных ферм
Металлозубчатые пластины MiTek

MiTek connecting plates are manufactured by in a wide

range of galvanized sheet steel different thicknesses (T150,

GNA20, M14). Most often used 1-2 mm thick steel of various

qualitative characteristics.

Wooden structures made according to the MiTek system they

are characterized by high profitability not only due tosaving

materials, but also by reducing the time construction. The

structures are made on special equipment: MiTek saw for

cutting blanks and MiTek press for pressing metal gear plates.

After that, the structures are brought to the construction site, where they are mounted.

 

Main advantages:

  1. All nodes are fastened together by metal toothed plates under the press, which allows you to make truss systems with a span of up to 30m without additional support;

  2. Production takes from 2 days or more, depending on the volume of the order;

  3. Fast installation speed on the construction site. Minimization of costs and human resources - a maximum of 4 people are needed to assemble the roof structure.

  4. The use of lumber that has undergone the process of technical drying (humidity not more than 18%); 

 

Our designs can withstand:

  • wind loads up to 150kg/m2

  • seismic loads up to 11 points

  • snow loads up to 350 kg/m2

Basic types of trusses

 
1_edited.jpg

Double slope truss without attic

 
3_edited.jpg

Double slope truss with attic

 
2_edited.jpg

Double slope truss-scissors

 
5_edited.jpg

One slope truss without attic

 

For questions about the calculation of MiTek structures, contact:

+375 (29) 204-93-21 Roman

WhatsApp, Telegram, Viber

Main engineer 

 
4_edited.jpg

Mansard truss

 

The main types of overhangs

mitek
свес крыши mitek
ферма свес мзп
свес фермы mitek
стропильные фермы мзп
фермы мзп mitek
производство каркасных домов

We have been successfully operating on the world market since 2003. Frame houses produced by Lyakhovychidrev Export are exported to the USA, Spain, France, Hungary, Denmark, Germany and other countries. We are currently expanding our production and looking for new target markets.

LYAKHOVICHIDREV EXPORT LLC.

5 Trydovaya st.

Lyakhovichi 225372

Brest region

Republic of Belarus

+375 1633 6 08 49

+375 1633 6 06 09

+375 1633 6 08 01 Accounting

+375 29 722 34 06 WhatsApp, Telegram, Viber

  • Facebook Социальной Иконка
  • Instagram
  • LinkedIn
  • YouTube

 Lyakhovichidrev Export, LLC 2022 All rights reserved