top of page
каркасные дома

RU  |  EN  |  ES

Materials and certificates            About us          Contacts

каркасные дома цена

Cement-bonded particle board (CBPB) 12mm

Cement chipboard is a monolithic slab with a density of 1250-1400 kg/m3, thickness of 12 mm with a smooth or hard surface.



CBPB is an environmentally friendly material. CBPB does not contain phenolic, formaldehyde and other toxic compounds. The main chemical binder is cement.

The plates are made by pressing a molded mixture consisting of softwood chips, Portland cement, minerals and water.

The high quality of the CBPB is ensured by strict quality control in accordance with the European standard EN 634-2.

The composition of the CBPB as a percentage of the total mass volume is:

The plate is a solid monolithic material. The separation of dust, gases and vapors from the plates is impossible due to the mineralization of the substances contained and the production technology used.


In case of indoor fires, the plates do not form smoke, do not emit toxic gases and vapors.


CBPB is primarily a structural material that gives rigidity to frame structures. During the production process, the chip-cement carpet is formed from four layers: the outer layers are made of small, the inner ones are made of larger fractions of chips. The assembled carpet is pressed.

One more property should be noted – the possibility of using structures of buildings with sheathing from CBPB in earthquake-prone areas and high-rise buildings.


The most widely used plates are used as paneling panels with a wooden frame in low-rise housing construction. The plates not only give the wooden frame additional rigidity, but also serve as protection from atmospheric influences. Load-bearing and enclosing structures of a house with a sheathing made of CBPB due to its smooth surface do not require additional processing. CBPB has a significant advantage in water absorption, compared with other slab materials.



CBPB resists the effects of fungi, woodworm beetles, and domestic rodents. It is important to note that this biostability is not achieved by introducing some special antiseptics into the composition of the CBPB and not by surface treatment with an antiseptic. The antiseptic is formed in the mass of the CBPB itself during the conversion of cement into concrete, since the byproduct of this process is calcium hydroxide, which creates a highly alkaline environment that prevents the development of mold fungi.


Thermal insulation PAROC UNS 37z

PAROC UNS 37z is a  heat-insulating and sound-

absorbing  material made in the form of plates.  

For its production, it is used  rock wool from rocks  

basalt group and low - phenolic  binder. At the

same time , the content  organic components in

the composition  PAROC UNS 37z is from 2 to 4%

by weight.


  • A characteristic feature of the PAROC UNS 37z plates is the open porosity of the material, which ensures its high thermal insulation properties and vapor permeability. At the same time, the density of the plates is high enough to become a reliable obstacle to convective heat exchange and excellent protection against heat loss in any climatic conditions;

  • Among the operational characteristics of the PAROC UNS 37z, its elasticity and the ability to keep the shape of the plate constant during the entire service life when laying, both on a horizontal and vertically positioned surface, should be particularly noted. In addition, PAROC UNS 37z plates do not shrink, bend perfectly and are easily processed;

  • PAROC UNS 37z plates are considered a non-combustible thermal insulation material, which can be used in the temperature range from -65 to +200 C. It is allowed to use plates at temperatures up to +750 C, but at the same time, the binding components evaporate and the plates lose their elasticity, while maintaining thermal insulation and sound-absorbing properties;

  • PAROC UNS 37z plates are not subject to corrosion, and are also resistant to fungal microflora and mold. Their service life is at least 70 years. If necessary, the plates can be reused





Oriented standard board OSB-3 9mm

OSB-3 is a multi-layered (3-4 or more layers) sheet consisting of wood chips (thin chips) glued with various resins. The chips in the layers of the plate have different orientations - in the outer longitudinal, in the inner transverse. OSB-3 is used in the manufacture of load - bearing structures in conditions of high humidity.



  • High reliability of the declared 

material properties, confirmed  in practice;

  • High strength — physical- mechanical

parameters of OSB-3 by 2.5 times  higher than

that of a chipboard;

  • Moisture resistance — the material does

not break down and retains its strength properties

characteristics when in water for 1 day (swelling coefficient — about 10%);

  • Stability of manufacturing quality;

  • Low weight;

  • High rate of deformation per fracture;

  • The OSB plate is not susceptible to damage by insects




Moisture-proof gypsum chipboard 12mm

moisture-proof gypsum chipboard is a modern, high-quality and high-tech material designed for interior decoration.

Moisture-proof gypsum chipboard panels distinguish

it from competitors  indisputable advantages –

durability and  practicality, high performance  

fire safety and fire resistance,  environmental

friendliness, biostability and many  other

factors. They allow you to call  gypsum

chipboard is the best at the moment  

the moment is analogous to drywall.

Technology  production of moisture-proof

gypsum chipboard excludes adhesives and

resins in  composition, this determines the

high class  environmental friendliness and health safety  human.


Gypsum chipboard achieves all these characteristics by combining the best properties of gypsum and wood in it. The molding mass consisting of gypsum, uniformly reinforced with wood chips throughout the volume, and water is pressed by a semi-dry method. The outer surface turns out to be light, smooth and compacted.


As a percentage , the composition of the moisture-proof gypsum chipboard looks like this:​

In addition, gypsum chipboard also has a low degree of noise and thermal conductivity, the surface of the material is perfectly smooth and even. The combination of these qualities makes gypsum chipboard plates the best option for interior decoration of the room and floor elements. They can be used for walls, floor, ceiling, as well as for the installation of interior partitions. Gypsum chipboard is also used for leveling walls, installation of window slopes and window sills, installation of ceilings and dry floor screed. gypsum chipboard, which has a high level of moisture resistance, can be used in rooms with a high level of humidity – kitchens and bathrooms.



  • High strength characteristics;

  • Environmental safety, which allows you to safely use the material for interior decoration in schools, kindergartens, hospitals, polyclinics;

  • Fire safety. Gypsum chipboard do not burn and do not emit harmful substances when heated;

  • Simplicity and speed of installation. To work with this material, no special knowledge and skills are required, a little experience of finish;

  • Moisture resistance. Gypsum chipboard does not deform and does not collapse even at a high level of humidity in the room;

  • Biostability. The plates are not exposed to rotting, the effects of fungus, the appearance of mold.



  • Density not more than, (kg/m3): 1250

  • Humidity, % (by weight of dry matter), no more: 2±0,5

  • Bending strength MPa, not less, for thicknesses 8-10: 8,0

  • Bending strength MPa, not less, for thicknesses 12-16: 7,0

  • Swelling in thickness in 2 hours, % not more than: 0,2

  • Water absorption in 2h, % no more: 10

  • Linear expansion with a change in humidity (RH 30%-KR 85%), not more than: 0,07



DECKER 135 diffusion membrane

DECKER ― three layer roofing membranes are an original product manufactured using the ultra-modern technology of molecular bonding of layers "ULTRASONIC". Only the "ULTRASONIC" technology allows you to achieve the highest strength of the membrane while maintaining high diffusion properties. Also, the ULTRASONIC technology does not damage the layers of the materials being joined, and that is the only reason why DECKER membranes have the highest service life ― from 50 years or more.










DECKER REFLEX active vapor barrier

The four layer active vapor barrier membrane DECKER REFLEXX Active with a reflective layer of aluminum is an original product manufactured using the ultra-modern technology of molecular bonding of layers "ULTRASONIC". This membrane allows you to actively regulate the vapor transmission capacity and dry thermal insulation and wooden structures.



Structural lumber chamber drying

In the production of elements of a prefabricated house only

calibrated and dried (up to 14%) is used lumber with

strength class C18, C24, C30.


In manufactured on MiTek equipment

farms on metal - toothed plates only

certified equipment is used MiTek

software, and lumber sorted by class

strength, certified a specialist.


Portland cement

Wood shaving



Hydration control admixtures


Wood shaving


производство каркасных домов

We have been successfully operating on the world market since 2003. Frame houses produced by Lyakhovychidrev Export are exported to the USA, Spain, France, Hungary, Denmark, Germany and other countries. We are currently expanding our production and looking for new target markets.


5 Trydovaya st.

Lyakhovichi 225372

Brest region

Republic of Belarus

+375 1633 6 08 49

+375 1633 6 06 09

+375 1633 6 08 01 Accounting

+375 29 722 34 06 WhatsApp, Telegram, Viber

  • Facebook Социальной Иконка
  • Instagram
  • LinkedIn
  • YouTube

 Lyakhovichidrev Export, LLC 2022 All rights reserved

bottom of page